This was a mistake based on a misunderstanding of the consensusrules=rdts flag in bitcoin.conf. Both the version and docs are now correct and deployed to the production registry. Thank you for bringing this to our attention.
Start9
Building StartOS, a graphical operating system optimized for self-hosting.
Ha yeah, we know. Getting there
Insane developments taking place every day: https://github.com/Start9Labs/start-os/pull/2867
You can absolutely install StartOS on the smaller SSD and use the larger one for service data.
StartOS by far the easiest
You can access your Robosats UI privately and securely from the local network, but Robosats itself is still connecting to orderbooks, etc over Tor.
Looks cool
For sure. You can install StartOS directly onto Macs with Intel chips:
https://community.start9.com/t/known-good-hardware-master…
https://community.start9.com/t/known-good-hardware-master…
Crazy simple guide for running StartOS on your Mac M1/M2 at near native speeds.
Total setup is 5-10 minutes!
This is a great way to experiment with StartOS or to run a permanent server.
https://blog.start9.com/running-startos-on-apple-silicon/
https://cdn.nostr.build/i/9701c087751d778f598e6e1f8fa6895…
Total setup is 5-10 minutes!
This is a great way to experiment with StartOS or to run a permanent server.
https://blog.start9.com/running-startos-on-apple-silicon/
https://cdn.nostr.build/i/9701c087751d778f598e6e1f8fa6895…
mkfs.vfat automatically selects a fat size based on the size of the partition. It doesn't really matter, as it's only for the boot partition.
Maybe someday, if people really care about seeing relay stats and nobody else builds it first. We're mostly focused on building StartOS right now.
Sorry, 20W power supply (5v/4a)
You absolutely can, though we do not recommend using external drives with the Pi unless you have a 5W power supply (not the default Pi power supply), the SSD is self powered or uses a powered USB hub, and the cord connecting the SSD to the Pi is very high quality.
This is becuase the Raspberry Pi 4 is notorious for not providing enoguh power to the external SSD, which can lead to unreliability or even data corruption. That is why Start9, Umbrel, MyNode, etc have all moved away from the Pi to other hardware.
HOWEVER, the Pi is perfectly fine if you do not use an external SSD. Instead, we recommend using a 128GB or 256GB high endurance microSD card, no SSD at all. Start9's Server Lite is exactly that, a Raspberry Pi 4 (8GB) running entitely off the microSD card. Pretty cool.
Obviously, you cannot fit the entire Bitcoin blockchain on 256GB, which means your full node will be running pruned, which is perfectly fine. It will prohibit you from running Electrs and Mempool, that's it. Everything else on the Martketplace will work great, including LND, Core Lightning, BTCPay server, etc, etc
This is becuase the Raspberry Pi 4 is notorious for not providing enoguh power to the external SSD, which can lead to unreliability or even data corruption. That is why Start9, Umbrel, MyNode, etc have all moved away from the Pi to other hardware.
HOWEVER, the Pi is perfectly fine if you do not use an external SSD. Instead, we recommend using a 128GB or 256GB high endurance microSD card, no SSD at all. Start9's Server Lite is exactly that, a Raspberry Pi 4 (8GB) running entitely off the microSD card. Pretty cool.
Obviously, you cannot fit the entire Bitcoin blockchain on 256GB, which means your full node will be running pruned, which is perfectly fine. It will prohibit you from running Electrs and Mempool, that's it. Everything else on the Martketplace will work great, including LND, Core Lightning, BTCPay server, etc, etc
Electrs and Mempool are possible if you use an external SSD.
The Server Lite runs entirely off a high endurance microSD card, which can't fit the whole Bitcoin blockchain or tx indexes, and those are necessary for electrs and Mempool. That's why it's only $199.
It is not recommended to use a Pi with an external SSD unless the SSD has its own power supply and the cord connecting it to the Pi is very high quality.
There is a reason why Start9, MyNode, Umbrel, Ronin Dojo, and others have come out with non-Pi devices, and why Start9 recommends installing StartOS on an old laptop or mini PC for DIY. It's because the Pi just barely delivers enough power to the SSD, so any minor fluctuation in power could result in glitchyb behavior or even disk corruption and loss of data.
A Pi without an SSD work just fine, but then has the limitation of storage space, making certain services unusuable. But many people don't care about electrs or Mempool, so it's perfect for them!
The Server Lite runs entirely off a high endurance microSD card, which can't fit the whole Bitcoin blockchain or tx indexes, and those are necessary for electrs and Mempool. That's why it's only $199.
It is not recommended to use a Pi with an external SSD unless the SSD has its own power supply and the cord connecting it to the Pi is very high quality.
There is a reason why Start9, MyNode, Umbrel, Ronin Dojo, and others have come out with non-Pi devices, and why Start9 recommends installing StartOS on an old laptop or mini PC for DIY. It's because the Pi just barely delivers enough power to the SSD, so any minor fluctuation in power could result in glitchyb behavior or even disk corruption and loss of data.
A Pi without an SSD work just fine, but then has the limitation of storage space, making certain services unusuable. But many people don't care about electrs or Mempool, so it's perfect for them!
📣 Announcing SimpleX Server (https://simplex.chat/) for StartOS, now available on the Start9 Registry 📣
Brought to you by #[0] 👏
TLDR: SimpleX might be the most promising solution to simple, private, decentralized messaging yet!
So far, it does direct messages, group messages, calls, voice messages, and video calls, and everything is e2e-encrypted and can be self-hosted.
Like Nostr, SimpleX is neither P2P nor federated. It uses servers to relay messages. You define which server to use for receiving messages, and your contacts define which server to use for receiving messages. Every conversation is likely to use 2 different servers!
Servers are simple relays adhering to the SMP protocol; they do not store profiles, contacts, or groups, and they only retain messages until they are delivered to clients. Read about the SMP protocol here: https://github.com/simplex-chat/simplexmq/blob/stable/pro…
SimpleX was designed with Tor servers in mind, and since servers do not connect to each other, there are no issues with interoperability: https://simplex.chat/docs/guide/privacy-security.html#usi…
#[1] 📣
Brought to you by #[0] 👏
TLDR: SimpleX might be the most promising solution to simple, private, decentralized messaging yet!
So far, it does direct messages, group messages, calls, voice messages, and video calls, and everything is e2e-encrypted and can be self-hosted.
Like Nostr, SimpleX is neither P2P nor federated. It uses servers to relay messages. You define which server to use for receiving messages, and your contacts define which server to use for receiving messages. Every conversation is likely to use 2 different servers!
Servers are simple relays adhering to the SMP protocol; they do not store profiles, contacts, or groups, and they only retain messages until they are delivered to clients. Read about the SMP protocol here: https://github.com/simplex-chat/simplexmq/blob/stable/pro…
SimpleX was designed with Tor servers in mind, and since servers do not connect to each other, there are no issues with interoperability: https://simplex.chat/docs/guide/privacy-security.html#usi…
#[1] 📣
Iris is now available on the Start9 Registry!
Connect your self-hosted Nostr client to your self-hosted Nostr relay.
Works locally and over Tor.
Thanks #[0] for building this client, and thanks #[1] for packaging!
https://nostr.build/i/nostr.build_d6d14a2ecc4f98e10266b0b…
Connect your self-hosted Nostr client to your self-hosted Nostr relay.
Works locally and over Tor.
Thanks #[0] for building this client, and thanks #[1] for packaging!
https://nostr.build/i/nostr.build_d6d14a2ecc4f98e10266b0b…

